Discussions for 32-313 : SWISCO.com

Kitchen cabinet shelving replacement

Hello. I'm trying to find a replacement similar to the above. Do you have anything similar to it? Regards, Monique

+1

Px ind 13 shelf clip

Kitchen cabinet shelves clips

Shelf clip

I need some shelf clip but the 1/4" peg is too small

Angle shelf support 17 PAT 4732358

10 pieces

Shelf support locking bracket

The post is only 1/4 inch long the diameter of the peg is 1/4 inch also

Jawala Int No. 132 Shelf Clip Replacement

Hello,I have a customer who needs replacement shelf clips for the attached.The print reads Jawala Int No.132.The customer just needs something with the correct DEPTH of pin to fit in the existing holes.It does not necessarily need to be a locking clip type support; it could be a straight pin or angl ... (cont.)

Pantry shelves pegs - smaller diameter (than the average ones) of the little cylinder that fits in the holes

There's nothing in the legs to indicate brand or specifics

1/2" shelf support pegs

IMPRINTED: There is a 2-line imprint above the peg itself that says: 1st line PAT'D 2nd line P.X.IND. PEG DIAMETER: Including gear-like protrusions " is 1/4", not including them is 3/8". DIAMETER PEG HOLE IN CABINET: About 6mm. QTY TO ORDER: Either 10 or 32 or whatever is closest to ... (cont.)

Cabinet shelf peg

DTC is the brand listed on the peg. The peg part seems to be 6.9mm in diameter it is 2.75in tall

+1

Left Kitchen Drawer Bracket Broken

Hello, I am trying to locate a matching part for my kitchen drawer. Please see photos above. Thanks, Don

+2

need some help - clip identification

hello, says p.x. ind. then the number 22

Cabinet shelf clip

On the clip it says 8 PAT'D P.X.IND

Replacement shelf bracket

Number 34 on part

Shelf bracket help

Hello! I'm trying to find replacement brackets for my kitchen cabinets and have hit a dead end. My cabinets are circa 1988 and the dowels that go into the holes are slightly larger than the replacement ones I find. The original dowels are also shorter than replacements so new pegs do not fit fully ... (cont.)

Cabinet shelf clips

Do you all have this cabinet clip

Replacement shelf bracket - round peg

Part say: PX IND 34 Patented W. Hanover , MA

Shelf bracket

Do you have these? The pin is 3/16

Searching for 55 mm shelf clip 3/4" shelf

I need some white plastic shelf pins for a kitchen cabinet. The shelf is 3/4", the pin is 5mm in diameter, with the groves and it is a locking one, as you can see in the photos. On the back is printed, "P.X. IND. 34" and below "W. Hanover, MA." The holes, in the cabinet, cannot take a pin bigger tha ... (cont.)