rear drawer bearing

Handy Person from comanche Tx

Jan 22, 2018 12:44 pm

I have a bearing that broke unfortunatly the staple went through part of the designation all I can see is R-40_2 the patent # 3207187. If you point me to a vendor or sell direct either way I'm tired of having it fall out. Thank you.

6 Replies

Casey from SWISCO

Jan 22, 2018 1:39 pm

We would like to help you with your hardware, if we may. You may forward us some photos of the part that is giving you trouble and we will be happy to assist you in finding a replacement.

Handy Person from comanche Tx

Jan 23, 2018 12:56 pm

My PC is down and I,m not an IT person so a physical description will I hope suffice. I checked the local HDWRE stores and noticed that the bearings were all based on a configuration which was generally the same. A rectangle top w/ a trianglar shape to an opening at the bottom w, two hooks to slide over the wood rail in the center. Above that was a locator opening to aid in alignment. The piece I have has an overall height of 1.925in.:the opening for the slide rail is .270in.:The guide opening is 1.170 x .2935in. The divider between the openings is .0790in. Hopefully this will help.
thank you for your time. Forest

Casey from SWISCO

Jan 23, 2018 1:57 pm

Thanks for your response. Unfortunately, without a photo for us to see, our advisement will not be a 100% accurate. I can invite you to take a look at our replacement drawer hardware by clicking here . Perhaps you may find a replacement piece that will work for you.

I see you mentioned having your PC down and unable to send a photo. There is always the option of sending a photo thru your phone if your cell phone takes photos. If you are having trouble uploading it onto this discussion, you may email your photos to customercare@swisco.com. Just be sure to include your reference number to ensure we upload your photos to the correct discussion.

Quick Learner from Texas

Jan 23, 2018 4:28 pm

you referred to a reference no.what would that be

Casey from SWISCO

Jan 24, 2018 8:56 am

The reference number I am referring to would be to this discussion you are currently having with us. It is located on the emails you have been receiving from us. Your number is: D103454. We look forward to your photos.