single slider roller-remove and ID 30" x 8'

Question

One question is how can I remove the roller? I removed the screw from roller and tried to removed it but did not budge. It does not look like the height adjust screw needs to be removed. Using a tape measure which was not easy the wheel measured 1 7/8". From these photos can you ID the roller?
Thanks, Louis

Paul · Accepted Answer

Hi Louis, thanks for the inquiry. We believe you have an Alcan door that uses our 81-133 roller assembly. You're on the right track for removing the door - leave the adjusting screw in the wheel. Just remove the frame screws on both ends of the door and with a block of wood and hammer, carefully knock off the bottom door rail from the glass. Then you can slide the roller assembly out from the door rail. Once you have the roller out, compare it's dimensions to the 81-133 to be sure. Hope this helps!