sliding glass door roller

Question

The diameter of the wheel is 1 1/8".  Note: the photo of the part outside of the door is very bent from removal.  there is a hole for a screw on top of the part (see in photos) that holds the glider in place. If helpful, the manufacturer of the door was patio enclosures, inc.

Dave Sr. · Accepted Answer

Hello,

We did carry this roller at one time but, unfortunately, it has been discontinued. That being said, take a look at the 81-263 roller which attaches with a screw from underneath, similar to yours. See if you can adapt this roller to your door.

If not, take a look at the 81-023 roller. I have used this roller in the past to replace rollers that are no longer available. It takes a little more work to install it. You will have to remove the bottom rail from the door and attach a screw from the top. Take a look at the roller along with the related information on how to install it. Thanks for posting!