storm door handle cole-sewell - Reg # 03189794548 180 : SWISCO.com

Home Owner from new jersey

Apr 2, 2023 11:07 am

I would like to order these parts to replace the screen door handle on my Cole Sewell
storm door.

3 user uploaded images

4 Replies

Casey from SWISCO

Apr 4, 2023 9:18 am

Hello,

We can't be sure without seeing the mortise lock in the center of your door and knowing your measurements but I would recommend starting by looking over the 40-049. Compare the dimensions below to see if you might be able to adapt this to replace the discontinued Cole Sewell hardware shown in your photos. Thank you!

alternate view of 40-049

Dimensions for 40-049

Home Owner from new jersey

Apr 9, 2023 10:16 am

Hi Casey.

The dimensions of the 40-049 are not exactly the same as my existing lock and I don't think it can be adapted to properly fit. The plate that is listed as 8 1/8 is 8 1/4 on my door and the screws which show at 6 1/2 are 7 1/4. The width of the plate is 1 inch.

The inner plate listed at 7 11/16 is 7 3/4. The screws show as 6 15/16 are 6 1/4 on mine.
Additionally the twist lock is 3 inches on center from the bottom of the plate and the upper lock is 5 3/4 on center from the bottom of the plate.

Any additional help is greatly appreciated.

Thanks

Is there another option that is a little closer.

Casey from SWISCO

Apr 10, 2023 8:19 am

Unfortunately, we do not carry a closer match for your assembly with the exact dimensions you've provided. We apologize for the inconvenience.