7H0661 Penco rollers

Question

I need rollers for a Pennco patio door. Attached are pictures. Roller is 1 1/4" dia.

Can you identify them and if so, what is your part # and price.

Thanks

User submitted photo of their door roller.

Using a digital caliper, all dimensions are a match except the width. Mine measures .75, overall width and .80 including the protruding dimples. Pictures show the top of mine with a 5/16" hole close to the threaded hole (yours is smaller and away from the center) and one less hole at the end, although threaded hole seems to match. No harm with the extra hole. Thanks

Dave Sr. · Accepted Answer

Take a look at our 81-279. That has a housing thickness of 3/4", which could be the width you need. As for the holes on the top, the most important hole is the one with the machine thread. This is used to attach the roller housing to the patio glass door frame. The distance from the edge of the roller housing to the center of the hole is 1-3/8". I'm not sure why there are so many extra holes in the housing, to be honest, but as long as the top threaded hole and the two holes on the end match up to yours you should be okay. Just check the thickness of the housing with your housing.