Casement operating hardware

Question

The short arm attached to the gear has the letter R stamped on the top side and the number 31538A and the letter L stamped on the bottom side
The short arm is 3.25 inches center pin to center pin
The pivot arm that is attached to the short arm is stamped 20810
The pivot arm is 3 15/16 c to c
The long arm is stamped "
EntryGard TRUTH on top and bottom
It is 8 15/16 c to c

Casey · Accepted Answer

Hello,

Your operator resembles the EntryGard 39-031 and 39-032 but the dimensions differ from the ones you've provided. Take a look and confirm that you are measuring as shown below.

Dimensions for 39-032

If you have a smaller link arm, we also offer the Caradco39-155 and 39-156. Review both options to determine if one of them would work for your application. Thank you!

Dimensions for 39-156