Bob from SWISCO responded:
May 7, 2020
Take a look at our 82-260 Mortise Lock. See if this matches what you need. |
Bob from SWISCO responded:
May 7, 2020
Yes, it certainly would! I'm a bit concerned about your outside pull though. The 82-086 has a thumb lever and key lock in an 'offset' position, or closer to the lower mounting hole than perfectly centered between them. That is certainly the case with your inside pull; but the outside pull looks like it may have been from a different handle set, since the key lock is centered. Therefore, you depending on how it's installed to the door frame, you may need to drill new holes to mount the outside pull. To be honest, assuming your inside pull and thumb lever are intact, I'd recommend going for our 82-044 Outside Pull along with the 82-315 Key Lock & Housing. You can install this key lock centered on the pull, which circumvents the issues I described above. See the video below for installation details. |