Lincoln Patio Door handle and lock

you can see in 0-2.jpeg that the plate has broken at the bottom screw.

THis is I believe lincoln patio door hardware, butI don't have any parts numbers.
I did measure as below. I used a the measure, and while I tried to see 15/16ths, I might've missed a 1/16th here or there.

Do you have just the broken piece?

Patio door hardware

Lincoln

Outside plate
is broken
8 3/8 long
15/16 wide

4" btw rivets or screws

Handle is 6 3/4 top to bottom
Curves about 2" to the right
Key cylinder is about 5" from tip to center of tumbler

Mortise piece
11 9/16 top to bottom
3/4 wide

2 latches
5 1/2" between bottom of top and to p of bottoms one
6 screws

Catchplate
About 10 3/4 long
3/4 wide

Inside latch is same dimensions as outside
Handle curves off to the left
Inside latch is 5" from tip to center of latch

HI, Bob.

The door handle se you show me looks like it!

Can I buy just the handle set? Will that work with my existing mortise lock and keeper?

If it's the wrong piece, do you take it back and refund?

While we are at it, I have a lincoln window crank that is missing the top cover (see pics), has always been missing the top cover ever since it was installed and the contractor skipped town in 2005.

I include pics of the crank here, plus the good one next to it so you can see the missing cover.

What can you do about this, anything?

Thanks,

Harlan

Bob

The handle you suggest seems to pair with a mortise that has one latch curling up.
The mortise I have has two latches, one curling down and the other curling up.
Does it matter, by the way?

Please take a look and see if the Lincoln handle you're pointing to is the right one.