Need 40ea Pivot Pins

Question

This picture shows the pivot pin from the lower sash and it looks to be stamped out to me. I measure it at 2 ½ inches in length, with a screw hole at 1 1/8 or 1 1/16 from the working end that inserts into the pivot shoe. The pin is 5/16 in width and 3/16 in height. All my lower sash window pins are badly corroded I need about 40 of them.

Emily · Accepted Answer

Hello!

Thank you for bearing with us during our busy season. Take a look at the 15-121 pivot shoe. This is 9/16" thick and 1-1/4" wide. As for the pivot bar, the 26-040 comes to mind. Review the specifications for these parts and see if they match what you need.

Alternate image for 15-121

Dimensions for 26-040