Old casement parts

Question

The short piece is 6 inches and the number on it is 30350 and is on both the bottom and top of window
The long piece is angled as it goes into the crank area but the part that extends out is 11 inches
The wide piece with the channel is attached to the bottom of the window and is 11 inches long.
Part of our problem is the deck above the window makes it hard to see and work. Good Luck

Bob · Accepted Answer

Thanks for posting. For the hinge set, start by looking at our 10" 36-004-10. See the diagram below, and let me know if you think you could adapt this to your window.

DImensions for 36-004-10

For the straight arm operator, either our 39-014 13-1/2" arm operator or the 39-028E 9-1/2" straight arm operator might work as a replacement. Double-check your old mechanism's dimensions to see if either of these match what you need. For a track that works with either of these assemblies, see the 39-533.

Dimensions for 39-014

Dimensions for 39-028e