Peachtree balances

Question

I have Peachtree balances, but a Swisco rep says Sash 1 doesn't fit the mold.

Sash #1: Peachtree
Stamp: 3060 1E 1
Balancer Length: 27-1/4"
Balancer Width: 9/16"
Sash Weight: 16lbs

Sash #2: Peachtree
Stamp: 3654 D1
Balancer Length: 23-1/4"
Balancer Width: 9/16"
Sash Weight: 20lbs

Sash #3 Peachtree
Stamp: 3060 BSI
Balancer Length: 26-1/4"
Balancer Width: 9/16"
Sash Weight: 16lbs

Sash #4 Peachtree
Stamp: 3660 1D 1
Balancer Length: 26-1/4"
Balancer Width: 9/16"
Sash Weight: 18lbs

Paul · Accepted Answer

Many thanks for posting. I have cross-referenced the data you have provided with our records and came up with the following:

Sash #1 should actually have 26-1/4"long balances, not 27-1/4". Please recheck your measurements. If they are in fact 26-1/4", then for Sash #1 weighing 16 pounds, the balances stamped 3060 can be replaced with the S745-26, with a stamp of 25.25-3.
For Sash #2 weighing 20 pounds, the balances stamped 3654 and 23-1/4" long can be replaced with the S745-23, stamped 22.25-4.
For Sash #3 weighing 16 pounds, the balances stamped 3060 and 26-1/4" long can be replaced with the S745-26, stamped 25.25-3.
Finally, for Sash #4 weighing 18 pounds and with balances stamped 3660 and 26-1/4" long, go with the S745-26, please double-check the sash weight. If it is indeed 18 pounds, then you want to again go with the stamp stamp 25.5-3, which designates a balance that can support a sash in the weight range of 13 through 19 pounds--if it is outside that range, let me know.

Let me know if that all makes sense, or if you have further questions.