Replacement operator, and locking device

Question

Operator works, but I have no connection to the slide bar on the sash itself from the inside it's pivoted on the left so it should be a left hand operator also need the locking mechanism on the inside I gave the size between the screw holes the handle is the only thing that doesn't work on that and if there's another pin that goes in the secondary arm not the main arm but the secondary arm I put my tape measure there to start it on the 1-in mark and measured that in the pictures any help would be appreciated My name is Brent, I'm here in Modesto California have my glass shop grants glass and windows I appreciate a contact back thank you have a great day

Jasmine · Accepted Answer

Hey there,

Thanks for writing in! The locking mechanism you have reminds me of our 38-095 Maxim Multi-Point Lock. To confirm that this is the right replacement, carefully look over the dimensions below to confirm if this is the right replacement.

Alternate view of 38-095

Your casement window operator looks like it could be either our 39-439B or our 39-253RB. The operator you need will depend on the attachments your operator needs to connect to the bottom of the swinging sash. Although, it is a bit difficult to tell from the photos which one you'll need. Take a look at the video below for an explanation on the comparison between each of these operators.