Seeking Replacement Lock

Question

This is a ReliaBilt lock from a sliding glass door. There are no identifying marks on the hardware. It measures appx. 10" at longest points. There are 2 screw holes for handle hardware located at appx. 3" and 7" measuring from end-to-end. The interior lock and exterior (keyed) locks use the same internal opening on the lock rather than 2 separate locations.

Casey · Accepted Answer

Hello,

Take a look and compare the specifications of the 82-239 or 82-265 to your assembly, depending on how your mortise lock attaches to the door frame. Thanks for posting!