Stainless awning parts needed ASAP

Thanks for reaching out to us. Looks like you need a number of different parts. We should be able to help on all points, but you will need to check your measurements in all cases. We can't determine precise size from just a photo of a tape measure, unfortunately, so you will need to review the dimensions for our recommended options to verify if they'll work.

Another important thing to note is that we don't sell stainless steel versions of every part you show here. Most have a corrosion-resistant powder coating, but are not otherwise made in stainless steel. 

Please consult the following list of products:

• Hinge: 36-004-10 stainless steel replacement hinge with a 10" base. As long as the base on your original is also 10", and as long as you replace the left and right at the same time, it should work fine.
• Lock: Either our 38-095 or 38-096. You will need to measure the fork projection to verify the better option. These are not available in stainless steel.
• Keeper: 38-276 and 38-277. Two important notes here: these keepers are not made in stainless steel and, furthermore, are not often used on this kind of lock setup. Make sure to carefully review our photos to verify that they'll match.
• Tie bar: 38-900 10.9" tie bar with 1 cone roller and 1 lock drive point. Make sure to confirm the length of the original to ensure that it's the same size. This tie bar is not available in stainless steel.
• Operator: 39-239C Encore awning operator. This part is stainless steel.

Please review these parts and let me know if you had any follow up questions!