WRS series

Home Owner from Milwaukee
I am looking for the left side of the 7r quick tilt and bar
And the bar for both right and left of 9 quick tilt. Thanks
3 user uploaded images
2 Replies
Jasmine
Jasmine from SWISCO
SWISCO
Expert

Thanks for writing in to us! Both of the assemblies you have here use the 15-087 Coil Housing Pivot but the housing marked with a 7 also uses the 15-086 Tandem Coil Housing. I am confident this is the replacement you need. Although, you may want remove both the housing pivot and the tandem housing to compare the dimensions and confirm.

Detail of 15-087
Detail of 15-087

Detail of 15-086
Detail of 15-086

These housings are compatible with the Series 180 Coil Balances. You'll need the S180-07 (one for the housing pivot and one for the tandem housing) and the S180-09 which would go in the housing marked with a 9.

There are two pivot bars we typically suggest using with the coil housing pivot. They are the the 26-040 and the 26-063. To determine which of these is the best replacement, you'll need to remove your pivot bar from the bottom of the sash and compare the dimensions below.

Alternate image for 26-040
Alternate image for 26-040

Alternate image for 26-063
Alternate image for 26-063

Reply to Thread
Current Photos:
Related Products
Related Videos
Related Guides