Weather stripping on bottom of screen door

Home Owner from Titusville, FL
I can't find the brand listed on the door.
The stripping itself extends about 1/2". below the channel. The channel is about 1/8" thick. The total length of the stripping (door width) is 36". The three screws holding the channel onto the door are spaced 14" apart.
I am also open to more effective weather stripping (e.g. brush type) that will fit into that channel, or if necessary buying another piece that screws into the door.
1 user uploaded image
2 Replies
Jasmine
Jasmine from SWISCO
SWISCO
Expert

Thanks for reaching out to us! If you are only looking to replace the insert portion of the sweep, I believe you may be able to use the 58-149 Larson Door Bottom Replacement Insert.

Alternate image for 58-149
Alternate image for 58-149

Should you find that the insert would not be a fit, the next best replacement solution would be to replace the entire sweep with the 40-111 36" Door Sweep. The installation holes are spaced 7-1/2" apart, so you'd likely need to drill new installation holes to install it.

Dimensions for 40-111
Dimensions for 40-111

Reply to Thread
Current Photos:
Related Products