Window casement actuator needed

Question

This says Entry Guard truth, metal attached to window is 11 1/4", arm coming out is Approximately 8 1/2 to 9".  This window cranks out to the left when you ard facing it.  What actuator would this be to replace it?  There are (4) phillips screws holding it in place, but window casement is the way to remove the screws, so not sure how to replace the actuator.

Bob · Accepted Answer

Thanks for writing in. See our 39-031 and 39-032, or our 39-155 and 39-156. Carefully compare the dimensions of each set of operators to your current hardware to see if either is a better match.