Window parts

Hello there!

Thanks for reaching out to us. Start by taking a look at the 26-040 and 26-083 pivot bars. Carefully review their specifications and see how they compare with your old one. 

We may be able to help with the pivot shoe and tilt latch but we'll need more information to help narrow down a match. For the pivot shoe, we will need you to remove an undamaged version along with the written-out thickness and width dimensions. As for the tilt latch, can you write out the distance between the two installation holes, measured from center to center? 

Thank you for the additional photos and information! Our 26-337, 26-344, and 26-435 measure 2" on the installation hole centers but review the rest of the specifications and see how they compare with your old latch. 

Regarding the pivot shoe, our 15-134 came to mind. This part is 3/8" thick and 31/32" wide so you may want to double-check the thickness of your old shoe just to be safe! You will also need either the S600-29 or S900-29 depending on the diameter of the outer tube on your old balance.