Available 8AM - 4:30PM EST, Mon - Fri at (888) 991-1929
Part Search
Part Search
Sign In

Window sash bar 6221

Search
Start a new Discussion
Home Owner from USA
Jun 18, 2018 7:23 am
I need to replace both sash bars on a window in house we just purchased. They have number 6221 stamped on them. Attached is photo. Please note part of left side shown in picture broke off and is missing. Also there is channel on right side of bar that fits into channel along both sides of window. Please advise.
4 Replies
Paul
Paul from SWISCO
Jun 21, 2018 10:28 am
SWISCO
Expert

Thanks for your patience. Unfortunately, we do not offer your exact pivot bar for your Schuco window. However, we still like to offer our suggestions, if we may on a possible replacement. Because we are not aware of your measurements or dimensions, we'd like for you to start by taking a look at our 26-089 pivot bar which does not include the top leg. You should still screw in the top side screw into the frame to hold the sash together. Let us know if you believe this will work for you.

Home Owner from USA
Jun 21, 2018 2:09 pm

Thanks there are 2 screw holes on the bottom edge of window, the first screw hole which is where bar broke off as shown in picture is 1 1/2 inches in from the bar end that gets inserted into the window frame and 5/8 inches in from window corner. Also the part that gets inserted is 3/4 inches long

Do I have to use the same original holes or can we make new holes if distance is different?

Paul
Paul from SWISCO
Jun 28, 2018 12:47 pm
SWISCO
Expert

I'm afraid we haven't been able to find anything that matches those specifications. The only thing in your style I could find was our 26-326, but it's not quite the same size. Using the 26-089 pivot bar I mentioned in my original response may be the only workable option we have.

Reply to Thread
Current Photos:
Related Products
Related Videos