Viewing all customer Discussions for:

Closet

Indoor mirror sliding closet door hardwareAcme name on hardwareThree doors Roller is at top of door.

I have large bifold merror doors that dot open and close correctly. I was told that each bifold should have one of these on it. Is that correct?

This is the plastic piece that keeps the top of the mirror doors from moving too much front to back.

Please contact me regarding replacement parts

Kennatrack mfrd. By jay g McKenna inc elkhart indiana patent pending i need some hardware that would work on this type of track everything I've found is too wide to fit in the existing track

Need this top Guide for a Closet. Thank you.

The door is 79" x 24 1/4" and, as you can see, is broken and bent. Where can I purchase a rreplacement door?Bill

Hi -have a set of glass doors on a roller and track setup. The bottom track is pretty beat up, so I'd like to replace the track. If new bottom rollers are needed could also replace those per your suggestion.

Hi, I have a Model "D" bifold door with glass. One of the bottom pivot broke and I need a new one. See attached photo. Would you be able to point me to the right part? Thanks. Thanks for your help. I attached some pictures of the bottom pivot that broke and didn't slide well on the bottom t ... (cont.)

Gold bottom track for Stanley Mirror sliding closet doors

Is this part available? Can you tell me the part name and number?

Hello, help identifying this part would be great. Thank you

need replacement rollers for wood doors (and Track) I only see mirror rollers and don't know if they are the same or a different design is required wood doors

5 1/2 inch on the guide pins, 5/16 thick metal 3/8 thick plastic sleeve 6 inch long pivot pin. 3/8 thick plastic collar and 1/4 inch thick metal pin

This is for a mirror wardrobe door roller

I think I've identified the parts I need. They are: 1. the stopper with the screw that prevents the top axis pin from sliding. 2. The two plastic rollers that go on the top sliding pin. The width of the track sliding slot is 04" or 10.3 mm The diameter of the top sliding pin is 0.18" or 4.6mm My on ... (cont.)

Hello, First THANK YOU(!) for this service as there seems to be a million door component parts and parts manufacturers. As noted in the Subject, the parts noted in the attached pictures are for a sliding wardrobe / closet door. Note this door has a full width and height mirror and I mention this d ... (cont.)

I need a replacement track for a Stainley mirror door 48"

Yes please. I am looking for replacement wheels for a Fleetwood Mirrored closet door. 1 13/16" x 1 3/8". Thank you. Shelley

Need bottom door roller for glass closet door.