Viewing all customer Discussions for:

Lavatory

how many go on each door mine are all in peaces wife toke doors off to clean and broke them off

Hi I've attached a few pictures. I need to know what shower door sweep to buy. The metal piece that is currently on the door in the second picture is 21 1/2 long and about 3/4 wide. I don't know what type of vinyl sweep was originally in the door. The shower door is 22 1/4 wide. I took a pictur ... (cont.)

Here are photos of my Walrich -SH 201 2 inch shower handle set . I need the same one or similar that is a 2 inch single towel bar handle chrome plated . Can someone email me back on this thanks

Attached are pictures of a restroom stall door latch that is very loose about to come apart. I need to know how to get it apart and replace it. There are no screws and the door is 1 1/8" thick. Any help would be really appreciated

Door handle for shower door needs replaced. Not sure how to determine the size

I am trying to remove the shower door sweep from a framed shower door. I have removed the two screws but the sweep is not coming off. Is there something I am missing?

I request a part number for a replacement shower door drip rail. The current drip rail, shown in the uploaded photo, came loose after 15 years. The drip rail is 24 inches long, approximately 3/4 inch in height, approximately 1/2 inch in width, and has two holes for screws. Thank you. ... (cont.)

On glass ANSI 297.1-1984 NKG. Not sure of enclosure manufacturer. Need to replace some roller hardware.

I need the set of brackets That hold the shower does to the frame runners.

Hello, I just moved into a house and the shower is leaking pretty bad. After looking at the bottom of it I can see the seals are missing. Don't have a clue what pieces or seals I need. If you could help tell me what I need I would very much appreciate it. Thank you - Mindie

Will the 1/4" frameless shower door seal hang on, or will I have to stick it on with a little sealer?

I need to replace a shower door roller for a curved shower door. Approx. 2016 Forest River Vibe. It looks very much like product code 10-058 with only one wheel. Approx. 1.25 in. Long. Photo attached

Dear Swisco, I need a replacement shower door seal. And I buy 2 for you and not working. Can you help me how I can retur the last one I buy to you guys back .can you let me now what is the correct seal I need thanks you

Looking for a shower door bottom retainer. See pictures below. I can?t find the manufacturers name on the door.

Bought house built in 1996, just has 2 vinyl strips to prevent leakage. Original piece must have worn out prevously. This vinyl fix will not last long. Question: Which product is best solution; I'm thinking 10-324. Also what is best way to remove vinyl strips that were put on with silicone? Thank y ... (cont.)

I am in need of a shower sweep,or some kind of suggestion to take care of water running out under the shower door. I do not have a make or an old sweep. Thank you!

I need to replace the wheels on the top of my shower doors. There are 2 per door with 3 doors per shower, so need 6 wheels per shower. I have 2 showers so need 12 total wheels for replacement. I?d also like 12 wheels for back up, needing a total of 24 wheels. Hope that makes sense! Thank you! ... (cont.)

The water stays in the lip of the metal piece, then leaks on the floor when you open the door. I think a rubber sweep would work, but I don't know what to order. Thank you,Robin

I need a replacement Shower door seal Similar to your # 10333 BUT 1/4inch x 781/2 inched long

help. I am looking for a shower sweep with drip rail that the house we just bought did not have one. I tried all type at Home Depot but to no help. I am looking at this Product Code: 10-324 but unsure if it will fit. Attached are photos of the shower door. Many thanks.