Viewing all customer Discussions for:

Lavatory

I just took apart the swinging shower door and removed decade-old moldy caulk. 1. Which position should I install the bottom bar? Picture A or B? 2. Is there a sweep I can purchase that will fit in the slot in Picture C? or should I go with 10-324. I am worry that 10-324 will injure the leg when ge ... (cont.)

2 pieces

Shower door sweep and drip piece. 231/2 inches long.

Showers are quite old but in good condition.. the other side is showing the end of the screw from the front... the wheel is encased in white plastic.. the diameter is one half inch....a bolt..a wheel encased in white plastic and a 1/2 Phillips head screw.. seems to complete the partolder shower doo ... (cont.)

Need some help replacing some broken ones on a customers RV. What is pictured is the good working ones.

No identification or part #

Need to know part number for new one contact information thanks

Looking for this look for the bathroom

I believe the 10-325 drip rail would work, but also need the additional rubber or vinyl seeep that slides into a t shape groove at botom of the door. Door measures 27" widea d looks like the 20-231 would be correct. Also want to purchase 4 screws (33-07). Will try and send photos! ... (cont.)

Hello I am thinking I need part #'s 10-556 10-563 10-590 I also have more pictures if needed. Thank you for taking the time!

Hi, I'm looking to get a new robber which is installed on the bottom of the shower glass door, in order to avoid water runs out of the shower. I have attached a picture that I took from the shower glass door, it shows all info about.

Tempered Glass ANSIZ.97.1-1984 6mm.M. I think I need a new part for the bottom left corner. It would appear as though some type of sticky substance has worn out, causing the door to fall out of place at the bottom left piece. Photos attached. Additional photos to see the entire structure and environ ... (cont.)

Shower door rollers

Hello,I jave a warnock hersey shower with sliding doors (model Manhattan, L 10294). The little black plastic pieces that attach the top of the door to the main shower body and allow the door to roll open and closed have snapped off leaving the two small wheels floating inside the track. In addition ... (cont.)

Suggestions?

HiMy frameless glass shower doors are becoming difficult to move. I believe replacing the two rollers on each door could resolve the issue, but I’m not sure how to find the exact parts I need.I was hoping your part identifier tool could help me identify the correct rollers and, hopefully, that you c ... (cont.)

I had previously ordered item 10-134. However, it was too short. I am looking for something that is a little taller as shown in the pictures.

I recently purchased the Concealed Latch Knob Assembly 10-562, but it appears to be the wrong part. I need assistance identifying the correct replacement. I have attached an image with the specifications for the part I need. Could you please help me find a match?

Need the rubber peice that goes in between the screw a ND tge bar at tge top

The back side has this printed on it. QUALITY ENCLOSURES