Viewing all customer Discussions for:

Other

Hello, This sliding door gets lots of Oregon Coast ocean air. I would like to replace the rollers and add a track cover. These look like pretty standard vinyl doors. Is is possible to figure out the rollers I need based on the model numbers and brand info in the second photo? Or, will I just ne ... (cont.)

Would like to purchase 24 pc. if I can be sure of the proper size. JPEG's attached should be sufficient to determine viability of your product. PS....this software is a great option for your customers. I really like it!Steve

I am missing several of the small plastic clips that clip onto the cams and hold the window in place. Can these pieces be purchased

Connects into the counter weight system. Trying to replace. Previously bought parts from you but they are not fitting in correctly. Won't lock into place so I'm thinking I have the wrong part.

Need 6 of the window balancers marked unique balance 31 e

I need weatherstripping for Kolbe & Kolbe sliding doors. Kolbe says it is 0.39 inches high by 0.27 inches wide. Please advise as to the best product to order. Photos are attached. Thank you. Bob

Hi, I thought I'd ordered the correct replacement pivot bar (265B) but apparently I was unaware that the former bar had threads in it. The hole on 365B is also just ever so slightly smaller than the old screws. The hole lines up fine with the existing one on the sash, so other than these issues I ca ... (cont.)

Need a full handle set. Not the inside door latch.

vynal awning repair parts. Ineed the cranking system. The crank is horizonal . Located on the botom of the window

We are able to see that it says 11600-17 on one side. It looks like the other side says B07 7/27 123 but it's hard to say.

I purchased a house with relatively new vinyl windows installed in the basement. I cannot find any manufacture markings anywhere on any of ghe window parts. I've searched local St. Louis window suppliers and hardware stores for these glazing strips but with no luck. Attached are a couple of pictures ... (cont.)

I also need 12 feet of weather seals

see photos, the piece that attaches to the window sash is broken. I am fine buying two replacement sets of locks. please advise, no idea of the manufacturer

To Whom This May Concern: I need Swisco to find a replacement part, a side mount pivot bar, for my Pella Double Hung Window. Earlier in the month, I purchased and returned (Swisco already provided refund to me) part number 26-402. And while it was pretty close to the original part, unfortunat ... (cont.)

Greetings. I am looking for replacement jamb liners and two window balance mechanisms for a doublehung Semco window from 2007. The window balance has a 22TG marked on it. Is this something you carry? And if not, do I need to replace the window?

Channel balance 26E BSI from Silver Line Windows

Can you tell me what size balancer this is Also can you tell me what the pivot boot is

Channel Balance 26 5 CJ HO

Want to find and order the part that is connected to the window. It a bracket where short gets connected to. the bracket is screwed to the window. Looking for the bracket part number to order.

Hello, We have an awning window where the window crank stripped and are needing a replacement. I am unsure of original manufacturer but saw similar assembly's on your website. Please let me know if this is something you can assist with or have any guidance on this matter. Let me know if you ne ... (cont.)