Viewing all customer Discussions for:

Weatherization

Greetings, I am looking for a replacement weatherstripping for Rockwell casement windows that were installed in 1984.

I have a customer that has some older JeldWen windows. I have attached photos of the seals next to a ruler. can you help me find replacements for these. I have more photos if needed.

Hello! Looking for this type of weather seal. My sliding door seal gap looks to be about 3/16" ish. Maybe 1/4" with non stick media you can compress into the gap. The seal is old, deteriorated, compressed... but the old seal looks to be about 3/16-1/4" height looks to be about 3/8", it is "8" or hou ... (cont.)

Not sure which style

looking for grooved white Brissel weatherstripping for patio door

I have a separate post for these same Wenco double hung windows for my 1995 built home (regards to friction shoe/jamb liners). This post is to confirm which of your weatherstripping to purchase.

Hi - the door has two sets of the same weather stripping. Flat bottom 5/16" wide x a strong 1/32" thick, bubble about 5/16" diameter. Thanks, Steve

The weather strip is on the bottom of the window

I need to replace the weatherstrip on 3 double sliding patio doors

I am in need of weather stripping for a Pella patio French door UF 2344 approximately 11 years old. I would appereciate any kind of help! My contractor has been dragging his feet on this situation. If I had the weather stripping on hand then they can install it!

Not sure what size w3ather striping to buy. I've learned we have t slot type of strip now.

Need help identifying the rubber seal. I think the felt pile is 3/16"X 3/16". Windows were installed in poured concrete wall in 1978.

need weather striping

Hi just bought a house - and need to replace the saddle and side/top weatherstripping on the three doors and maybe under the fixed panels as well. Can you help identify the right weatherstripping? Thank you very much. meant to specify that there are Marvin patio doors installed in 1994. Thank youAll ... (cont.)

I am looking for Guardian Sliding Door weather stripping between the stationary and moving frames. Door was probably installed around 1996. See pictures for model #. Thanks: Christian

I believe the manufacturer was Decor Measurements are 1/4"/each for both parts of the weather stripping

Need replacement of weatherstripping bulb for double-hung Simonton windows purchased and installed in 2001. Not sure of the correct size.

I need some help in identifying the brush slide in weather stripping that is under my storm door. It is 34 1/2" in width. Please adviseif you can. Thanks much.

need 4 pieces 28" and one piece 20"

Looking For This Profile Of Wedge Gasket For Older Pella Windows