Viewing all customer Discussions for:

Weatherization

I'm looking for these 2 kinds of weather stripping

Hello, I have a weatherstripping seal for the bottom of the window. The backer of the seal width is about .4-.42”, the channel in the window it rides in is about .372" and .320" deep. It is a simple shape, but I can't find a similar type. Thanks

weather strip foam tube portion approx 5/8" T-on retainer 1/4 inch (0.270 in?) hgt of retainer approx 1/16" Windows installed late 2015

A weather strip that goes around the window

Weather shield brand 30 year old windows

Simonton replacement windows, vinyl double hung. Bottom window gasket completely deteriorated. Installed in 2000. Tried to include tag in window.

I am in need of weather stripping for Norco Wood Crank windows 30+ years old See attached photo, please review and identify part thank you

This seal came from a window in a house built in 93. Kinda hard to measure due to size. I got it as close as I can see. Diameter is 5/16 ish.. maybe close to 3/8. The ball on the end looks to be 3/32. The edge of the circle to the tip of the ball is approximately 1/8. I had removed the piece before ... (cont.)

I cannot find any markings or details on the piece.

All windows on house, from Wellington, were installed in 1999. Since then, the company has sold out and the new owner does not carry or do replacement parts for these windows. It is now time to replace the stripping, as dried out and falling apart. Do you or know of any company that carries this ... (cont.)

I need to replace the seals in the windows in my home. Any assistance that you could provide in finding a suitable replacement seal would be greatly appreciated. I have attached a photo of the existing seal.

It has L shape with a large bubble and a small bubble at ends with insert strip behind larger base at 90degree angle as shown in hand drawn photo with approx measurements. ash

The groove to which the stripping snaps in is an (.125) 1/8inch

Hi, I need to replace the leaf weatherstrip on multiple Jeld-Wen casement window sashes, bought thru Home Depot in 2004-2009. I've attached a pic. What do you have / recommend? Thanks!

Hi there, I'm looking to replace a strip of glazing bead in my aluminum+glass door. I've taken the window pane out on one side because the bead had split, but I'd like to replace it if I can find the right material. Thanks!

I am looking to replace all of the weather seal. Do you have this type? See photos . The bubble measures 1/2". tyvm! Ali

I need the smallest bottom swivel pin for my biological doors. No place I've check has this size. Do you?

I hope you can identify the correct replacement seal for my windows. The windows are vinyl, double hung. Unfortunately I can not identify the manufacturer. The date of manufacture is June of 2020. I have attached a photo of the only identification I can find on the window. Wishing you the best of lu ... (cont.)

Im in need of weather stripping for some of my Allied storm windows. Upon dissassembly there appears two sizes required. Both have bases 3/16" with two different pile heights 3/16" and 1/4". Both are white but both also have a "seal strip" . Your product offerings meet the dimensional requirements, ... (cont.)

I need new weather stripping for the horizontal divider between Kolby double hung windows.