Viewing all customer Discussions for:

Weatherization

I have American Craftsman 8500 series. The slide in weather stripping had degraded. The seal is white plastic 3/16 wide where it sits in the slot on top of screen. The brush sits at 90 degrees and rides against the window frame.

This is on a sliding door with two interlocking strips o. Both sides 1 34" wide. Do you have anything like that

Appears to have originally been held on by a self-adhesive strip.

I just replace the felt and rubber strip on my first window. all of them were locked in with 3 chisel marks tapped in the felt and rubber strips to lock the old strips in place. what is a good and not too time consuming way to lift or file those back open so I can slide in the replacement material? ... (cont.)

The pile in my windows appear to be crimped into the frame. Is this a normal scenario?

I am trying to find the weatherstripping for double doors manufactured by Extrudart Metal Products of NJ. back in 1981 of which we have three sets on our local church. I only have "vague" information as to what I believe is the model number as "Model L, vision light, bronze" and or possibly called ... (cont.)

I am looking for a pile weatherstripping with a full 1/2" backing and 3/8"-7/16" pile height. We have tried 7/16" backing, but it will not lock in the groove and falls out.Pat

Do you have a similar size (Height) product in black or any other dark color? If not I think you had one in 3/16" X 3/16" which may suffice. Regards,

Can you tell me what size this is?? Thank Youlocated at bottom of window casing. against the lower sash.

We are restoring our historic house. We've have a woman experienced in restoring historic double hung windows doing the job. Windows are huge, all 13 are 89 inches high, 33 to 44 inches wide. She wants this felt with the aluminum strip she said 5/8 X 3/16? Thank you!

I need a Kerf for a door gap of 12/16" to 13/16" The door is metal and the Kerf length is 3/8". Do you have something that can help me?

I have 2 Milgard french doors that are in need of replacement weather stripping. I have attached pictures to make the 3 types of weather stripping easier to identify. The first pictures are from the top of the door. I tried to take it off but it was just crumbling. The two pictures of the white weat ... (cont.)

I purchased Triton doors in 2003 with the following double-sweep weatherstripping pattern as shown. I don't believe they make Triton doors any longer, and am having difficulty matching the channels. The weatherstripping has come apart, but it had two separate sweeps (one on each side the the center ... (cont.)

I am looking for replacement weatherstripping for jeld-wen vinyl windows manufactured in 2000. Home Depot directed me to your company. They said the bubble was 1/2 inch. Foam filled with a fin and beige in color. Thank you. Sandra

Door was installed 1996

I see on the latch cover Adams Rite. Cover has a pile on outside. It's in one of the pictures. Door weatherstripping runs inside aluminum Chanel, which held on the door by screws, with same screws hight can be adjusted. V. Metrikis.

I'm looking for bubble seal like the one in the picture.

I am looking for the round foam seal at the top and bottom of my windows. They are Vinyl Anderson windows I believe and are about 20 years old. The round foam piece has separated from the part that slides in the window and the foam tube is about 1/4" diameter now. I assume that it may have been larg ... (cont.)

Weatherstripping around door.Charlie

Hi, I have vinyl replacement windows that I installed in 2000. Over the past couple years, we've noticed condensation develop overnight during the winter, at the lower edge of each sash. I expect this is caused by failed/worn weatherstripping. I removed a piece and am trying to find where I can b ... (cont.)