Viewing all customer Discussions for:

Weatherization

Our church building has two sets of double doors with this weatherstripping in a groove cut on one door only and there is about a half inch gap between them. I am trying to find replacement stripping for them. Hopefully you can help, the doors are 7 feet, approximately.

Good morning,We have Norco casement windows approximately 33 years old. Millwork is in good condition, but exterior weather stripping needs to be replaced. We are having trouble finding the weather stripping.I will send you pictures of the weather stripping in a separate email. I would like to hear ... (cont.)

this snap and glazing is also the handle/ledge that you would use to open the window. I am having trouble finding it.

Hello. I am wanting to replace the weatherstripping and also felt pile on my windows, they came with our house and have a HS I7 model number from what I can tell, and also a serial number. I need to know what size weatherstripping and also pole, they appear to have a couple diff

We are looking to identify and replace the weather stripping on two Anderson permit shield casement windows approximately 45 in tall 22 in wide The code for the operating handle that fits this window is 39-095

rubber that slides in terrace doors. I think it keeps the bugs out I'm not sure.

need some of this. can you help?

looking for a left tilt latch and weather stripping for this window series: 7880 tilt sh AAMA/NWWDA 101/I.S 2-97 H-R15-45X77 H-R25-45X77

I'm searching for a replacement for screen splines off my patio, it's an aluminum frame, like a pool enclosure (see pics) the spline is flat, Tshapes, with a bulb at the bottom of the T. A round spline if .165 fit very tightly, but did not completely full the channel with the screen under it. I thin ... (cont.)

Wwas not able to find any markings on the interior or exterior of the windows.

Need weatherstripping for both top and bottom windows. Top window is 1/4" wide tube. Bottom I think is square shaped Both are 37.5" long

.We had to replace the stationary patio door - and we need the weather seal that gets tapped in around the door and the frame. Attached is a picture. We need black weather seal.

This is a seal that is attached to the lower sash of a double-hung window.

Have enclosed photos of perimeter and face seal for you to see if you have any seal.

Can you recommend the correct part please?

I can't find weatherstripping with this plastic foot that slides into the bottom of the window. I've 10 windows that the stripping needs replacing.

the image shows the weather stripping attachment piece torn from its base (the bubble piece) The bubble is 1/4" wide The attachment piece is 1/8" wide by 3/16" deep. the window/weather stripping is 38" wide.

Hello, I am hoping to find a replacement for this weather stripping. I received you company information from my neighbor a contractor.

Hello,I have slide-in weather stripping that has degraded on screens that are over 20 years old. The slide-in part is white plastic 3/16 wide where it sits in the slot on top or on the side of the screen depending on the window orientation. The brush sits at 90 degrees and rides against the window f ... (cont.)

Q-Lon foam weatherstripping from a vinyl casement window sash. I believe the house was built in 2006. I ordered some awning/casement sash Q-Lon weatherstripping from Amesbury truth, but it turns out it was the wrong profile. This is a t-slot type of profile, so my hope is that there is something clo ... (cont.)