Viewing all customer Discussions for:

Weatherization

Looking for 15 ft of this door seal for Vista wall storefront thank you

To replace is it hard to get back in after taking old out and the windows will be on the house when doing it and do I need Tools ? 55-185-3 Dennis

Its for a patio door

I'm having trouble finding weatherstripping for my doors hope you can help

I think its the 6' Glazzing Bead Part number 55-192, but I can't find the center which j think its called a Mullion.

Need the weather strip for the product listed in the screenshot.

I'm needing 2 rubber straps that slide under and into the bottom tracks on my exterior door. It's got a T at the top to slide into the track and each T has a double strip of rubber

T Slot is .187 Bulb is 7/16 Total width is 7/8

Looking for the bottom outside door weather stripping on the movable door. And any other weather stripping for the rest of the door since it looks like I would have to remove the door to install a new one. Thx

Q-Lon

This is for Kolbe casement windows installed in 2003. This weatherstrip is located on the jamb not the sash and is a foam filled off set tube 3/8" in diameter. I need 1000 feet of this one. I nedd 2 additional profiles.

Standard Pella metal clad exterior patio door in 8LF height from around 1992. Photos of damaged strip in place and pulled out at the end to show kerf and bulb.Dimensions are 1/4" base extension length, two bulbs - large = 1/2" diameter & small = 1/8 diameter.

I need replacement weatherstripping for my Silverline window

We're looking for replacement weather stripping for crank out windows. Series 8100 AAMA/NWWDA 101/I.S.2-97 and AP-LC25-48x36

Weather stripping on bottom of lower sash and top of upper sash where sash meets the casement. The seal was foam filled, but in the picture the vinyl outer layer has fallen off completely. The anchor has 2 barbs on each side of it. I don't really see it in your list of products, but maybe I miss ... (cont.)

SGcc-1110 4021 32511256 Herculite patio door 76 X 80 manufactored 2004, I need a replacement snap-in weather strip. Please contact me as soon as possible with part number and ordering information

One inch thick, double brush vertical wearher strips. Aluminum is 1 inch commercial door. Can you get just the brush or both pieces? Andrea

Hello, trying to figure out what type of replacement weather stripping I should replace this with. It has like a center divider in it. Thanks! Measurements in pictures.

Do you guys have angthing like this black rubber type of glazing height is about 11/16 but could be longer by a bit if need be. total width is about 7/16 and the part that presses into the channel is about 5/16 wide and between 3/16 to 1/4 deep thanks in advance for your help

I have a custom bilt storm door fly from Lowe's. The bottom seal is worn T-shaped the top part that goes into the door track is 3/8 inches long and the seal part is 1/2 inch long