Viewing all customer Discussions for:

Weatherization

Good day, looking for the seal in the picture. It's a tee seal 1/16 by 9/16

I need spline to secure glass on front portion of china cabinet. I bought the china cabinet used , I'm guessing 50's or 60's antique, Right and Left doors appear to have spline replaced, the center glass which doesnt open was mostly without (2-3 short peices of spline and some cardboard chunks holdi ... (cont.)

I need to replace the seals on my Pella aluminum storm windows that were installed in the mid-1980s. The rubberized seal has become stiff and no longer makes a good seal. Can you recommend a replacement gasket that I could purchase from Swisco?-- Bruce

Hello, Can you direct me to the correct part for this door bottom sweep? It looks like it may slide in on a metal track. Thank you

White pile weather stripping. Pella Model 350 sliding glass patio door. 7/16 base and 1/4 inch pile with a center plastic blade/seal.

It's on a Kolbe and Kolbe metal clad door

ANDERSEN overlapping sliding patio doors.

Greetings, I have a aluminum, horizontally sliding single pane window frame for which I am trying to find a suitable weather strip replacement. I have attached an image of the cross section of the stripping that came off the window. A drawing with dimensions is also included. Additionally I have in ... (cont.)

Hi, I'm looking on your website and I can't correct identity what seal or glazing strip I need. Here is a few pictures of the seal and the window track.

Looking for weather strips for Pozzi windows that are 37 years old. Do you have anything that will work?

Replacement: Weatherstrip Assembly. Architect, Traditional, Double Sliding Door, French,, Vent Right / Fixed, 71.25 X 81.5 10 1: Traditional, 7282 Vent Right / Fixed Double Sliding Door Frame Size: 71 1/4 X 81 1/2 General Information: Factory Assembled, Standard, Clad, Pine, 5 7/8", 4 9/16", Black ... (cont.)

Hello, noticed the seal on the bottom of the lower frame of a double hung window was compromised. I don't have the window brand or model. Thank you for your help Cord

I measure L tip to be 1/4 inch. Length of strip is 34 inches

Trying to locate i have pictures

I'm searching for replacement seal/weatherstrip for my late 80s/early 90s Weather Shield casement windows. The outer seal appears to be a bubble seal (like 58-053?) and the inner looks like a bulb strip (similar to 58-173?). Do you have any recommendations on replacement parts?

this is a St. cloud windows sliding door gasket. need something like if not the same one. Thank you,

My exterior window seal is rotted and I need to replace i

Looking to replace damaged weatherstripping for certainteed windows installed approximately 1995.Pictures attached. I can send measurements if you have this type available.ThxJoe

Looking for this seal. It has a T shaped part that slides into the channel. The seal is foam filled vinyl covered. It is similar to your 58-200 seal except that the mount is T shaped and not kerf. The T measures 3/16".

Weather stripping for a door