Viewing all customer Discussions for:

70-110 Panel Clip, 1/4" offset

I have storm window panels on the inside of my crank out windows. I am looking for these metal clips to hold them in.

Hello, I need to replace 1 dozen of these. Do you have these threaded rivets and rivet gun?

Best guess: 1980's or 90's. The storm window covers a very large picture window, and is overall in better shape than it appears in the photos. We need to replace a few of the brackets. Do you have these? Thank you.

i looked at all those parts and still don't know which ones to get. can you help me, i think the doors was made in somewhere in ohio if that would help. thank you

I'm sending you a pic of the strip. I need two 8 foot lengths. Strip measures 7/8" wide and 5/16" height.

i am interested in a storm door panel clip similiar to your 70-180, but with these dimensions: 3/4 in wide and 1 inch long with only one side off set by 1/4 in. please let me know if you have that size and what would be the cost. i believe that this is for a cole sewell storm door. ... (cont.)

Dimple Clip Product Code: 70-209 with 5/16" or 3/8" offset vs. 1/16"

Can you please help me match the following screen clip and screw? I

I need to replace plastic clips for a storm window panel. The old clips are one inch in length and 1/8 inch thick although slightly tapered. There is a 1/4 inch right angled section that holds the window in place. Help.

I have a customer looking for these retaining strips. He has no identification on the brand of storm door. There are 2 different strips. Is there any way you are able to identify these? Thank you Nicole

I need to replace all four parts of the snap in glaze glazing that holds the glass part of the storm door. the measurements are 2 pieces measuring 74 3/4 in & 2 pieces of 29 in. The width were the glazing snaps in measures 1 1/8 of an inch . Please let me know if you provide this product. ... (cont.)

Plastic screen/storm door window clip to hold either screen door or glass insert.

LOOKING FOR REPLACEMENT STORM DOOR CLIPS, CANNOT FIND ANY MODEL NUMBERS OR BRAND NAME ON THE DOOR. THE CLIPS ARE SELF-LOCKING ALUMINUM OFFSET. THEY MEASURE 5/8 WIDE, 3/4"LONG (WHERE THE THUMB SCREW GOES INTO), THEN 1/4" LONG 90' BEND, THEN 3/8" LONG RETURN BEND THAT GOES AGAINST THE GLASS DOOR P ... (cont.)