Viewing all customer Discussions for:

81-077 Sliding Patio Door Roller, 1-1/4"dia. Steel Concave BB

1" tall, width is 13/16", wheel is 1.5" and is concave

cannot find a manufacturer or numbers

No markings Aluminium door frame. The lug with the hole in it seems to be bent.

Hi there. Wheel size is 1 1/4". What other measurements besides those pictures do you need to help find the right replacement rollers? These are coming off an older aluminum frame Sun Valley 300 Sliding Glass Door.

Photos attached.

Hi, We are looking to purchase 1 x pair of rollers to replace the defective pair on a door measuring; Height = 2055mm Width = 1210mm Thickness = 35mm The number on the side of the rollers is; D-719 I have attached images to assist. Please can you either direct us to a UK based company ... (cont.)

W-9/16" W-13/16" with dimples H-1 H-1 5/16" from top of screw hole L - 2 14" Metal ball bearing wheel

The door these rollers came out of is an older glass sliding door. Unfortunately, there were no wheels in them so I can't provide any wheel measurement. The length is 2 1/4 inches, the width is 1/2 inch, and the height is 7/8 inch. Any help will be greatly appreciated.

No names or markings found. Width is 2 1/8". Height is 1". Wheel diameter is 1 1/4".

Patio Door was installed in 1988. We are trying to replace the rollers as the door no longer moves freely. The replacement rollers that are available at Home Depot & Loews don't fit. Please advise if you carry anything like these

Need two replacement rollers for sliding glass door. Brand = Viking , model = Sun Valley 300 SDG-R15

Hello I'm looking to replace 4 roller assembly for my rental property The width is 0.5 inch The height is 1 inch The metal wheel is 2.25 inch

Hello, I need a pair of rollers for an older aluminum sliding glass door. See attached pictures and let me know if you need another view. If you send me the part number I will be glad to jump back on your site to order it, what ever is easiest.

Metal frame sliding door c. 1975. One of these on each end of the door.

Good afternoon. I need 2 new roller assemblies. My door is seized up!! The diameter of the roller wheel appears to be close to 1-1/4"...

I have a Sun Valley 300 sliding glass door SGD-R15

The door is from 1975. I'm looking for two sets.The wheels are 1 1/4" diameter and 3/8'' wide. The screw holes are 7/8" apart. If this unit can't be found, should I drill out the wheels and replace? If so, what wheel replacements should I use?

Missing attachment fastener. Have adjust fastener. Need 2 units and attachment fasteners.

Hi I need help identifying this roller wheel for my glass sliding door.

Aloha, I am looking for some replacement wheels for some PPG Hurculite glass sliding doors. Thank You, Nick