Viewing all customer Discussions for:

81-139 Sliding Door Roller, International

need 2 for one door

I have a large sliding glass door and my current rollers are very worn and need replacement. The wheels are 1 1/4 in diameter, height is 1 1/8, and width/thickness is about 11/16 inches.See attached pictures and please let me know if you have a suitable replacement roller or need any more informatio ... (cont.)

Can you please advise if you have rollers to match the one shown in the attached photo.

I need help identifying the rollors used in my sliding glass patio door, also can I buy the extruded aluminum pieces to a door frame? I think mine was made by imperial in the early sixties, my home is mid century modern by design. Please advise, Thank You. These are them I have 4 sliding glass do ... (cont.)

Hi, I'm looking for the right replacement wheels for my sliding glass door. The door itself is metal, the wheel feels like metal to me too. Attaching pictures with dimensions here, thank you!

Replace roller

Do you carry the replacement wheel for the attached photo?Note the bent tab on the right side should be straight so the end "T" pulls against the veriical frame.Alan

I need to replace my track and the two rollers that are under my sliding door. The track is badly worn, with a shredded string of metal left on the track where the door slides. I hope you have these parts. The track is originally brown, but seriously, I'll take any color I can get. Thank you! ... (cont.)

Hi, I was wondering if you could help me provide new wheels for my customer's sliding door. I've searched local stores and online for these and haven't had any luck. Please look at the attached photos and let me know what you think. Thank you.

Hi, looks like the only branding is "Product of Del Mar Eng. Co." " Long Beach ,Cal" pat 3 670 357 . The roller wheels are "flat" and an 1 inch round could be steel but seems to have some texture too them. I'm in need of two , if possible , any help would be much appreciated. Would have been great i ... (cont.)

I would like to replace the rollers on my mirrored closet doors (2). They are approximately 30 years old. I will upload a couple more photos in a second email.

There wasn't any numbers to identify the part that I'm looking for. As far as I can tell this is 1 1/4" plastic roller in a aluminum housing.

Aloha, I can't find any manufacture names or numbers on the frame. This is a very heavy door. Is a modern set with two rollers on each side available that would fit? Is there a higher quality than plastic rollers? Mahalo Bob

I'm looking for replacement sliding door rollers that would be suitable for an oceanfront condo (the salt in the air tends to corrode everything).

Replace the patio door wheels

Product of Del Mar Eng., Long Beach California ..no on old unit..AT367D357 2 inches long?.11/4 inches high?.15/8 inches wide

Do you recognize this., Just let me know. I'll check the website. But I would like a second observation if you could. Thank you

I have four closets, each closet has two sliding doors with large mirrors. Each door has two rollers of the type shown in the photos. I need a total of 16 rollers.

I would like to replace all the wheels on four, 4' x 6.5' mirrored closet doors. We have powdercoated the frames which now look beautiful. All we need are the wheels. The old wheels are imprinted with Product of Del Mar Eng Co Long Beach CA Pat 3,670,357 Length from wheel end to t post portrusion ... (cont.)

In the attached photo: My parent's sunroom door is as old as Taylor Swift and the door doesn't glide anymore. This is my problem to fix, apparently. Pictured are both Left and Right wheels, however that weird brass piece on the top left came apart when I was wrestling it out, I'm not sure if it n ... (cont.)