Viewing all customer Discussions for:

87-065 Sliding Window Roller, 7/16" Flat Wheel

Looking for replacement rollers with the nylon wheel 1/2" diameter and 3/4" wide. The bracket hole spacing is 1 1/4" but is not as critical as it screws into a track. Overall height is 5/8"

Windows are from late 70's early 80's (mostlikely) and are double paned

This part is on the bottom of a metal window frame. Window size is 56×28. Heavy. A metal wheel. 5/8 in height 1&7/8 in lenght

The roller appears to be 3/8 inch diameter It fits in a 7/16 inch wide recess in the frame The roller appears to be 7/16 of an inch above the recess I would prefer a metal roller

Could you please help me identify the attached window rollers? If you have them I'll need 8 units. Thank you, Marco

I'm writing from Bermuda to enquire if you can assist me in identifying and in supplying me with a set of rollers for two different NuPrime sliding glass windows (that have seen much better days!). I would need 4 rollers for each window and I'm sending a photo of the bottom of each of the two wind ... (cont.)

Hi I am looking for some roller replacements for my windows. I cannot tell you what kind of windows they are. Here is a picture of the roller. I need 10 of them. Dimensions 1 7/8 long, 7/16 wide, 7/16 high plus 1/16 for roller protrusion, 7/32 roler width. If you have a full metal replacem ... (cont.)

I am just wondering if you could give me the height of this 87-065 roller, from the bottom of the wheel to the top of the housing. Thanks for your help! Don