Viewing all customer Discussions for:

91-003 Spring with Nylon Retainer

Looking to replace 2 top corner brackets which have lost the tang which keeps it in the frame track. Additional photos are for aid in identifying purposes.

Ty I will try to get one out and send more pics. I appreciate your response

Slide bolt for a Harvey window screen

Hi - I am looking for replacement clips for a Daily Manufacturing Screen Door.The clips hold the sliding window in place.Please let me know if you still have them - I would need 4.Thank youRose

This part will hold my or old storm window open

I am reaching out regarding the BF Rich vinyl/tilt-in windows I have, which are equipped with sliding half screens featuring latches. Unfortunately, a few of these screen latches have broken tips and require replacement. I noticed that your 91-001P window latch set appears to be a perfect dimensiona ... (cont.)

Like to get left and right for 5 doors

Looking for these, in particular the little plastic tip, but might come as an assembly with the spring

Looking for replacement latches for old Harvey window screens. This latch has a large metal ring which helps pull the screen in and then manipulate the latch. Thank you for any help.

I'm looking for this sliding latch for my window and screens in a three season room. I need about 50 to 60 of them almost all of them are broken or the tip is broken off

I have storm with no brand name. The glass inert that slides up and down has 2 spring loaded latches. One of them sprung loose and the spring with plastic catch escaped to parts unknown. I still have the metal slide, but would gladly replace with something similar. The "add photos" doesn't seem to w ... (cont.)

Hi... I'm looking for these window screen replacement parts. The screens, I believe, are Harvey Windows. Thanks!

Do you also happen to have the grey metal spring latch that keeps the window in position? See picture below. The measurements for this part are: 3 1/2" long, 1/2" high, and 1/4" wide. It glides into the end of each bottom track and is held in place by the little plastic knob at the end of the s ... (cont.)

HI: I'm needing some nylon storm window parts, The windows have a sticker on them that says Monal Windows, Monett Missouri, I'm needing Window slide bolts, Slide bolt spring with dog, And the Nylon corners, Attaching a few pics, Please let me know if you can help me, Sincerely, Kelly O'Toole ... (cont.)

Looking for slide bolts for a larson storm window(L203 model) need 12 rh and 12 lh

L = 3-7/8" Widths = 1/2" Thickness = 1/4 Clip holds storm window of door open. Has small pocket for spring and retainer pin.

We live in older mobile home with storm windows on sunroom. Looking for latch's. I have attached a picture. Thank you so much

We have a problem with salt corrosion on storm window latches. Does anyone know of a product that protects the window latch from corrosion and will lubricate the latches. WD40 is not an option as it does not inhibit salt corrosion

Screen latch that locks in a small v notch in frame to lock in place

this is what it looks like out of the sash. Has no top to slide in channel.