Viewing all customer Discussions for:

95-181 Pella Screen Corner

Plastic corner bracket for screen assembly

you sell pella screen corners. there are two types. do you have the corner with the thicker bridge in the corner"

Hopeful you have the plastic corner that joins rail sides of our sliding glass door screen. Thank you!

Hi, Looking for replacement corners for ~1995 Hurd screens. See attached. What is your recommendation? Thx, Mosquito-bitten warrior.

This may seem like a sill question, but how do you install these new comer pieces? Thanks!

Need the key in the included image. The 95-169 and 95-181 was suggested, however that will not work.

Attached find a few pictures of the corners for my Pella screen inserts. The screens are 7/16' deep, and the part seems most likely to be the 95-181 part number on your web page. Any help you can provide would be appreciated.

I have attached a photo of the corner of one of our screens. Please let me know based on it what part should be ordered

i have two old screens (about 25 years old) where all four corner braces are shot. they were installed in some anderson windows, but the corner braces don't look like anderson --but rather like Pella. see photo. the dimensions are almost precisely 3/8 by 1/2 ". please advise which kind of corner ... (cont.)

Hello, I could use some assistance in identifying these screen corners so that I can order them from you. Thank you.

The corner keys of several screens in our home have become brittle and cracked apart. Are your new Corner Keys new plastic, or are they old inventory that might also fail once installed?

This is a broken part of a corner key for my screen frames I will need 16 of these and some new knife latches. These screens are about 20 years old and most of the keys have broken in half. The one in the picture is the best specimen I could get. I hope this helps. It is 3/8". Thank you, To ... (cont.)

My windows were bought in 1989 and the vinyl corners that hold the screen frames together on the screens are old and break easy. Which corners would fit my screens.?

pella screens are about 25 years old with 4 identical corner plastic L's which are 3/8 inch thick, 1/2 inch wide that extend into frame 1 3/4 inches along long edge; a 1/8 inch protruding rib joins the arms of the L at a 45 degree angle; I think pella corner product code 95-181 is the correct piece. ... (cont.)

While I can't identify my windows, the screen keys appear identical to 95-181 except for the diagonal, which is 3/16". From what I have read on your posts, the 95-181 has a 1/16" diagonal, which, if used, will result in a 3/16" gap with the window frame. The 95-169 shows a 3/16" diagonal, but does ... (cont.)

Anyone know where I can buy replacement plastic corner brackets for Pella window screens?

Hello. I have Pella screens that have fallen apart; they are very flimsy. My local rescreener can't repair them, as he doesn't have the corner parts. I see you carry a screen corner (outside mitre) for Anderson screens. Will this work for Pella aluminum screens (measuring 25 x 31)? Thanks ... (cont.)

I see you have item 95-181 which is the correct size I require. Just wondering if you have this size of pella corner in bronze. thanks...tom

I have Pella windows with removable screens on the interior side of the casement window. Over time the plastic corners of the screen frame have become brittle and started to break. The frame of the screen is 3/4 inches and the corners are made of plastic. The plastic corners are exposed by about 1 ... (cont.)

Ihave a Pella(?) patio screen door, that I need replacement corners for. They resemble your #95-020 corner, except for: they're Plastic, the thickness is .400" instead of .3/8", and the upper leg is 1.145" across instead of 1 1/8". these differences may be due to being made of plastic instead of me ... (cont.)