Viewing all customer Discussions for:

10-133 Door Handle With Towel Bar Insert, 2-1/4"

Hi Expertee, I come here again. my shower handler needs replaced, I tried to measure the size, the lenth between the two hole (center) is around 2", please see my attached picture for detail. I don't know which part need to order, thank you for your help!

Chrome Framed Sliding Shower Doors Towel Bar and Bracelets Inside and out Handle Pull- 25" x 2 1/16 screw holesPlease, I hope you can help.Thankfully,Michele

Do you carry these handles?

I am hopeful that you can help to identify some replacement parts to a shower door.I am trying to identify replace both ends of a chrome finish shower door handle set, 2-1/4" with 2 towel bars. Each shower bar opening is 1/2" wide and 1" high.I believe I will also need to identify and order both en ... (cont.)

I am not sure which bracket to order. There are 2 very similar brackets, I removed the back handle and is has the number. L121-1A on the handle. I need the part that is rectangular and holds the towel in place. pictured are both the broken chrome holder and the back handle. Is this the correct one s ... (cont.)

Can you tell me if this is something you have -- have no idea what it might be called and haven't had any luck finding it. Thanks!

Need to replace missing handle o. Inside shower door.

I need 2 end brackets similar to the one pictured in # 10-133 with out the towel bar . . it has a 2 inch center to center mounting holes. the towel bar is 1/4 inch thick by 3/4 wide Thank you .

Dear Sirs > after our tel conversation I am sending you the picture of the shower door rail. > My tub has two sliding doors. > The other picture is of the one that broke where the screws attach to the frame. It is on the other side of the sliding shower door. > Could you please check if you have in ... (cont.)

I have metal framed sliding glass shower doors. They used to have a towel rack on both the inside and out. There are existing holes that re 27-3/4" apart. We are looking for chrome or something silver colored. Is that something you would have?

L121-1B replacement. Looking for a replacement for this shower door handle.

shower door bracket.

I need to replace , one has broken off I probably need the towel bar also. Thank u!!

This is door that needs 2 inch hole spaced door handle and towel bar to hang on the outside of the door. The measurements for both items are in the attached pictures.

Need parts for shower door

1. item1 - shower door wheel 2. item2 - shower door wheel's screw 3. item3 - door handle 4. item4 - bar 5. item6 - door handle's screw.

Need to replace Brass coated Handles (2 in #) and Brackets 2" (4 in #). Towel hanging bars (4 in #). I would appreciate, if you can contact me with the parts

Hello, I need to replace a shower door handle pull. Part number reads L121-1A . Oil robbed bronze.

Hello,My customer writes, I need a shower door handle with the handle hole spacing 2" apart center to center and then the length horizontally from center to center of handle mounting holes is 28". Pictures attached.Please advise if you have this part available; please provide the cost and lead time. ... (cont.)