Viewing all customer Discussions for:

21-014 Bifold Door Pin, Leigh

One of the bifold doors hadn't been working. In continuously lifting it up to close it I bent the top pin (the one with the spring). The door came off and comparing it to the one on the other side I definitely need the plastic "thing" as shown in picture 21-058. The only thing I see inside the doors ... (cont.)

Would like to buy hardware for the following 2 doors. Leigh Full-Vu Metal Bifold Doors. Attached find label of door. Pics of the 4 corners of the door. Do you have replacement tracks for these doors? I can see that a spring and cotter pin is missing but have no idea if anything else is missing. ... (cont.)

Morning, I have three Leigh Full-Vu bi-fold doors and was hoping to find the parts for the floor and ceiling tracks and the probably some of the pins. Two of the doors are 93x29.5 and the other is 93x35.5 The doors are in good shape, but the tracking mechanisms need to be replaced. Wanted to ask if ... (cont.)

Pin for Bifold door

found similar pins but they we're 5 1/2" long

This pivot pin goes on a metal bi-fold closet door. It is 5.25" long measured under the head. The head is 5/16" diameter and the body is 1/4" diameter. It can me steel or brass (maybe aluminum).

It appears that these doors were already make shift to me. I originally thought the nylon was threaded but it just appears that the bolt eventually pushed through the door pin cap.

hello, the 21-014, 21-049, and 21-058 appear to be the same pin with differnt accesory parts. Am I correct? Is ther any differece as to where the hole for the cotter pin is drilled? Ie. is one part 2" from the top vs 2.5" from the top...