Viewing all customer Discussions for:

21-023 Bifold Door Bottom Pivot Pin, Float-Away

This is a metal bifold door, its 30" wide. Hoping to find the pictured track for a couple of extra doors I need to installed. Thank you.

Hi. I'm looking for a replacement pin for an older metal bifold door. The attached picture is the pin that is broken and keeps getting stuck in the channel. The pin length is 5", cap is 3/8" diameter, pin seems to be 1/4" diameter. Thank you for any help you can provide.

It is 5 1/2 long please see photos

I need a replacement track for an old set of mirror bifold doors. The guide at the bottom of the door measures almost 7/16" wide. The door set is 4' wide. I have included a picture of the bottom guide, the top track, and the label on the door. Contractors Wardrobe only attached the mirror to someone ... (cont.)

It appears my Float Away metal bifold door hardware matches product codes: 21-022, 21-023, 21-024. However, is there a different part for the bottom guide pin... or are you to purchase (2) of part code # 21-022 (one for top; other for bottom)? Thx Pam

My name is Don The team member I talked to was Steve. Need lower pin for 2 panel metal door. The lower pivot pin (with nut seems to work). Company part fron Float Away. Float Away - Home Products Inc

I can't find and markings on my four closet doors or the hardware. Can you identify these?

I am trying to fine the correct pins for a Flow Away ,steel ,mirrored ,bi fold closet door. The doors have two different types of pin holders. Most of the doors that work have white plastic bushings at the top an bottom of the steel door with some kind of black plastic for adjusting. These seem f ... (cont.)

Hi, What are the part numbers needed for the top and bottom pivots for steel bifold doors?

Hi, We just bought a foreclosed house and one of the bifold closet door is missing the bottom pivot pin. I would like to verify if the following parts are the right parts to replace/fix this closet door. Bifold Door Guide Pin, Float-A-Way 21-022 Bifold Door Bottom Pivot Pin, Float-A-Way ... (cont.)

Hello, I need help getting all new hardware for the set of metal doors I have for a customer. Please see attached photos. I would like to get all new pins, mounting brackets for pints and upper lower track as well. Please let me know your thoughts on cost, eta on parts and shipping cost to ... (cont.)

Dear Sir / Madam, I am trying to find the bottom pivot and bottom guide for the metal bi-fold closet door (attached please find the manufacturer info.) The door is up to the ceiling and quite different from today's wooden closet doors. I found on your website the following product (21-035) but i ... (cont.)

I cannot find a manufacturer or other distinguishing features, but pic 006 is of a similar door showing a top pivot. The actual pivot rod that I need has a different pivot bracket, as shown in photo 007, where the 3/8 inch that goes into the bracket must be 1/4 inch. I also need one bottom bracket ... (cont.)

Need bottom pin looks like photo 5-7/16 " long x 1/4" pin OD with barrel spring type. The oneI have is missing spring and pin cap

hi, i'm looking for these parts, wondering if you have them

i have four sets of Float Away bi-fold metal louvered doors with an April 1983 stamp on one of them. The doors are 93 inches tall - two with 17.75" wide louvered panels, and one with 13.75" louvered panels, and one with 11.75" louvered panels. The hardware is exactly the same on each of them. I ... (cont.)

need to know if you carry these pins, (pics attached). Metal pins,approx, 51/2" long, pin head w/ adjust approx. 5/16 in diameter and set pin 1/4 " please let me know and how much. Thanks Dave