Viewing all customer Discussions for:

55-180 3' Snap-in Vinyl Glazing Bead

I have 23 yr old wi dows where the vinyl window casing is cracking and breaking g away. I would like to replace, but unsure of the part to order. Casing is 1/4 inch square with a 1/4 lip that goes under window.Do you have a part to recommend? Or can I simply use some glazing compound and or weath ... (cont.)

I need help finding this 1/2" glazing strip. See attached collage.

Good afternoon, I'm looking to find 5-6 sticks of a big white box trim (shown in attached photo).Do you have anything like these in stock? If so, what is your pricing and steps needed to process an order?Thank you!

This is a vinyl glazing bead its not the original but its what works as a substitute for a milgard window do you have this in black?

Need help finding right one. Thank you.

I have Croft aluminum tilt windows I believe are the Reliant 96 Series. House was built in 1995 and these are the original windows. Looking to replace a piece of plastic that runs along the inside between the top and bottom window. The length is 27 and a half inches and looks like they snap into pla ... (cont.)

Trim that goes on outside of window that has a lip that sticks between the window and frame. It's plastic or vinyl and got damaged during a hail storm.

On the outside of our bay window, we are missing a couple plastic pieces that seem to cover the edge of the glass. It's almost 3/4" x 3/4".

The photos are PVC white window glazing for aluminum frame double hung Windows. The double pane glass are about 3/116 to 1/4" thick. The windows were installed in 2008. Thanks Michael

Need to replace two or three sides of the glazing on a window but I don't know brand of windows or which part to order

Looking for a glazing bead for Georgia aluminum windows

I see you have a snap in glaze seal for windows. Will your product replace the brittle pieces i have? Thank you

Hello. We purchased 55-180, but after trying to install it we see that our part is slighly different than what you have supplied. From the pictures and dimensions enclosed, can you determine if you have the same material that is more of a fit for what we need?

Hello I need bottom bearings and bearing holders as well as side muntins for Artium Windows. The house is 14 years old.

Where can I get this part from for 8 windows? The window model number is ANSI - AAMA 101-85 RH 30.

I'm trying to find some beading to replace the photo attached. Can you see if there is one similar that would work?

Looking for a piece similar to or like this one. Hoping someone could steer me in the right direction.

Can you help me with these parts. Two balance springs, two shoes, two pivot bars and two top latches. The house was built in 1979.

Looking for vinyl glazing bead for Mayfair single hung aluminum windows (from about 1995).

Hello, I ordered some vinyl glazing but ordered the wrong size due to the old piece I used was very deteriorated. I was able to get a better piece which is what I attached in the pictures. Could you look at the picture and advise me of the right size? Also do you send small sample pieces since I am ... (cont.)