Viewing all customer Discussions for:

32-119 Grass Adapter Bracket Pair

This plastic bracket is broken on two of my kitchen cabinets, causing the drawers to fall of the tracks and downward. I'd like to replace these before reinstalling a new brackets style. The plastic piece snaps into this black bracket behind the back of the drawer.

I need both sides times 2 for the end supports for the pictured rail. Rail has KV and a smaller CR stamped on it.

Late 80's cabinets have these plastic pieces that sliding drawer tracks go into. They are starting to break. Do you have replacement pieces? Got the broken piece(s) out, 301515 is the number stamped on the plastic piece.

I saw similar on posts but the replacement doesn't look like it would work. As you can see on the inside of the cabinet the back has a piece of wood to help support the bracket. disappointed that I can't find metal replacements....doesn't seem plastic is very strong.......

Two of the brackets from my kitchen drawers are broken. I would like to replace the brackets. Do you still have this bracket? If so what do I need to order?

looking for this exact replacement or something that would be a good replacement.

Hi. Purchased these, but they didn't hold the weight of our kitchen drawer for very long. Do you have other options that are of the same size, but sturdier or where the part is one piece instead of one part that fits into another part? Part #32-012 comes in 2 parts. Thank you for any sugg ... (cont.)

trying to find replacement back bracket that is 2 1/4 x 1 1/4 and appears a quick snap which has a metal bracket this slips into. The metal part says grasso.

I'm looking for the replacement to this drawer slide. It appears it has two plastic dowels. Haven't seen it before.

Plastic bracket at back of drawer hardware to hold slider in place. Existing piece has a large G with the numbers 6020 6 and either RH or LH after the number. We have located similar items but they are not large enough for the drawer hardware. Need opening approximately 1 inch by 3/8 inches. Th ... (cont.)

Do you have this item

Looks to be Nylon, mine is broken. Large letter L on upper left hand attachment plate, apparently to identify left side. Smaller letter D in extreme upper left corner. On the right side of the plate, large letter G with an asterisk above it on its left. 6600 written below the G. Large letter G pri ... (cont.)

bracket to hold drawer glide. G600 was printed on it. Installed 1988. Need several left and right brackets.

This is from a mobile home drawer..

Looking for a replacement for the socket one a 1? rail. The right side shifts when opening or closing the vanity drawer which cause the glide to slip out of the track. Vanity was installed in Spring of 2017.

I purchased 32-119 Grass adapter rear mount brackets. Found that the slides are bent. (adapters fit) I am not sure what size to purchase for slides. The inside slide is 23L, the slide mounted on drawer is 22L. The height of slides are 1" but 1 1/8" at ends. There is a "G*" to the left of the inside ... (cont.)

Trying to replace this parts on my sister-in-laws kitchen cabinet drawer slides. Any ideas?

Would this be available? Kasinath

It seems like there are predrilled holes in the cabinets that the brackets fit into. I dont know if I need these exact ones or if I can just use a different replacement?

This broke. Trying to find replacement as wood is bad in back and no more Holes can be made. Probably installed in the 1980s