Viewing all customer Discussions for:

32-127 Self-Close 3/8" Inset Hinge Kit

Hello there, Can you please help me find he right hinges for my kitchen cabinets? I attached some pictures. The space between the 2 holes on the outside is 2 1/8, the plate with the 3 holes for the inside is 1 1/8 wide and 1 1/2 high. The little cut outs/steps are 3/8. Also, one set has #1 on for t ... (cont.)

it is a 3/8 inset self closing hinge, we need 50 pairs of them. I have ordered several different brands and none fit - the spring area is more narrow than the new replacement hinges, so it will install in original holes but door will sit too far over so it wont shut properly.they are most likely 30 ... (cont.)

I have some USIP 3/8" inset hinges installed on cabinets in a 47 year old house that we want to replace with a similar hinges in satin nickel. I've attached photos of the hinge. I found similar inset hinges at HD and Lowes but the distance (7/8") between the center of the hinge holes to the in ... (cont.)

I would like to see if any parts for my cabinets. My name is oscar

Hi! I recently bought my first house and I'm redoing the kitchen cabinets, along with all the hardware. I tried to salvage the hinges but a lot of the pins were broken and loose, etc. I purchased inset hinges from Home Depot and of course they don't fit and won't work. I attached a picture of the hi ... (cont.)

This appears to be a match, however can you give measurements of distance the 2 holes are from the edge (where in the picture of 32-127 is 1.5" wide)?

I was looking on your website and it appears that you have a hinge that matches up with an old hinge I have (#3391420). I

We would like to replace existing self-closing 3/8" inset hinges on our kitchen cabinets. They are around 25 years old. All of the hinges we have tried fit in the old holes, but shift the door a bit so that it no longer closes. Really don't want to have to fill the existing holes & drill new ones ... (cont.)