Viewing all customer Discussions for:

32-127 Self-Close 3/8" Inset Hinge Kit

I would like to redo my kitchen cabinet doors in white with black handles and doors and need 44 black bevel hinges. I talked to KSI where I Purchased cabinets about 33 years ago and they referred me to you. Thank you, Roxanne

Hello I am looking for a hinge with the pat no 320532 & 3212124 It is not a 90 degree angle The sides of the cabinets are angled in

I believe I ordered the wrong hinges. I ordered 32-101 whereas I need 32-127. The only issue I have is the inset measurements on my existing hinges is appears to be 1/4" whereas yours says 3/8". The pat #s on the hinge are 3.391.420 and 3.908.228 and the numbers 7128 and the number 3. and they a ... (cont.)

Looking for kitchen cabinet hinges The house was built in 1977Cabinets have a 45 mitre on the edgeThe only number on the old hinge is PAT 3613151Please let me know if you carry this hingeThank youMargie

Patent #3,391,420 3/8" self closing inset hinge Copper finish. Want these in nickel fin ish.

would like these hinges in polished brass. The doors are 3/4" thick

I'm not good at measuring but the door is 1/2" thick . The part that screws into the back of the door is 1-1/2" in height and 1-3/4" wide including the piece that extends beyond the door.

PAT 1967 There's a faint 420 on it and the letter F towards the bottom

I have 40+ cabinets that I want to replace the hinges from the brass color to nickel. As other's have mentioned in other posts, I also went to Lowes and purchased hinges to find they are not a perfect match. 32-101 appears to be the replacement model, but I want to confirm before I take the plunge. ... (cont.)

Hello! I am looking for a replacement hinge on a kitchen cabinet as shown in the picture. Any help would be greatly appreciated.

They have a few markings including Pat. No. D-182899. Other number 172, 591 51. I'd like to find them in brushed nickel if possible. Thanks!

This hinge is from a Robinson Hutch door made here in Wilson Michigan bought in th mid 90's. They are self closing and all need to be replaced. The plastic spring holder has broke on them. Not sure the style or measurements. including photo's. No help at all from the company that makes the hutch. ... (cont.)

Cabinet hinge - home built around 1970. Patent # on one photo and the # 78 on 8 of the 34 hinges we took off in the thumb print between the holes for the screws. The carpenter that is working for us thought they were called a semi-concealed hinge, but I'm not sure. We are not able to find any to rep ... (cont.)

Threw away my Hardware need to replace or anything that's comparable

I have the USIP hinge with no offset, the flat part is 1-5/8 wide and from the bend to the edge of the flat plate it is 1-3/8. I need 96 of them in brushed nickle. the patent numbers are 320532,321214,325484 and 3568241 the distance between centerline screw holes is 2-1/8

I need 3 sets of these. Been all over. Other 3/8" insets do not line up. Cant move mount holes because of other cabinets

Mark wondering if these hinges come with no spring or a soft close . I ordered a sample pack to see how hard the spring will be .

Any chance you can locate this door hinge? I need 4 of them...

I would like to replace these old hinges with a satin finish. I am unable to find anything locally. Wondering if you could help. Michelle

Need Door Hinge