Viewing all customer Discussions for:

22-114 Satin Nickel Rail Pull, 3"

I just got a new dresser and one of the bail pulls has broken and I need to replace it. These are 3 inch center to center bail pulls off of a Pennsylvania house chest and wondered if you happen to have one that I can buy?

3 inch brushed nickel and white. Need 5

as you can see from the photos the dresser that I am looking for the draw pulls. I have all the handle part of the pulls. I am missing 4 of the round peices where the pull screws through the drawer. The back of the dressorhas a sticker saying John Wanamaker Philadelphia New York. I am assuming ... (cont.)

I'm look for this drawer pull. It is from the Pennsylvania house furniture Homestead collection from the early 1970s. I am in need of eight of these pulls.

Does anyone know where this pull can be purchased? Distance between center to center on screws is 3 inches. Length is 4.5 inches and height is 2.5 inches.

Hello and hope you are doing well! I am trying to locate replacement 3 inch drawer pulls same as or similar to the hardware shown in the picture. This hardware is from a dresser purchased in the late 1990's or early 2000's. If you can locate the same or similar pull, that would be great! I am in ... (cont.)

3" ctr to ctr mounting with drop handle in antique brass similar to 22-202

Tried to upload thru your website unsuccessfully this morning. These are small steel sash handles from a 30's era building in Dallas. They were mounted in pairs on the upper steel sash to pull down with. They are approx 3-5/8"W (w/ 3-1/8" centers) x 13/16" high w/ a 3/4" projection, about 3/16" in ... (cont.)

I am looking for 11 8" branch cabinet pulls by Modern Objects. See attached pics. Thank you

Cabinet door pulls. Installed in the mid 70's. Thanks

This Drawer pull is for my 2004 Beaver Monaco RV. It measures 5 1/8" long. 3" center to center of mounting screws.

Hello, can you tell me the diameter of the handle rail - is it the standard 1/2 inch? Also, what is the projection from the drawer/cabinet face, both to the handle rail and overall. Is the material stainless steel or simply brushed carbon steel? Thanks