Viewing all customer Discussions for:

81-175 Dual Roller Assembly, 1-1/2" Plastic Concave

need replacement

Attached are pics of wheel assemblies that I am having trouble matching. I could have sworn you carried them at one time but I no longer see them on you site. The distinctive feature is the two flared cut-outs on both lower sides of the assembly. I have ordered a package of 1 1/8" wheels & several p ... (cont.)

no markings, numbers, etc it looks like one featured in your video, but am unable to find anywhere else online 5/8" wide 1 1/16" high the hardest feature to match is the screw hole that jets up and out, any help is appreciated!

These are photos of the broken rollers from our Fleetwood sliding mirrored closet doors. Fleetwood does not have them and does not know where to get them. I would be very grateful if you can help us locate and obtain them. My name is Mark

3-1/8" long 1-1/16" h 11/16" w With bent flanges on each side

These rollers are from a Fleetwood Window roller

The roller wheels are inch and a half diameter, there were no markings or serial numbers on the roller assembly. The glass door is dual pane with a 36.75 inch width to the frame.

Can you please help identify this part and either identify the part or a replacement that will substitute for it?

This is a tandem stainless steel wheel assembly from a sliding glass door manufactured by Fleetwood USA. The tab on the right should be straight up. I am having trouble finding this. I need 6 assemblies.

I have three sliding doors where I want to replace the rollers. They were manufactured in Phoenix by Western Insulated Glass in approximately 1992. They are still in business but say they cannot identify the rollers. Your product 81-175 looks close but the wheels are plastic and I prefer steel. ... (cont.)

Hello im looking for this rollers atached picture and aproximate measurements This rollers are for a fleetwood patio door,, the doors were install it about 12- 14 years ago 11/16 wide Wheell 1 1/2 Can you help me??

Aloha Can you help identify suitable fully stainless replacement for the attached? Mahalo Simon

1 inch diameter wheels (metal ) 13/16 flare 1 1/16 height 11/16 wide 3 3/16 length Seems to match your 81-175 except wheel diameter on 81-175 is 1 1/2 mine is 1" and material is nylon. would these work or do you have exact match. If nylon is a quieter choice that would be great. Any help wou ... (cont.)

Hi Swisco, can you let me know the make and model of this tandem roller assembly? Housing is 3 1/8" L x 11/16 w x 1 1/16 h. 2 nylon wheels. In one of the pics you'll see the nylon wheel has broken off. The nylon wheel that's on there says 'ACE'. Ages ago I was told this was either made by, or made f ... (cont.)