Viewing all customer Discussions for:

95-258 Silver Line Screen Corner Set

Looking for screen corners with latch and upper corners with stop.

I have window screens that measure 70.5" by 45" that are dry rotted.The new windows were installed in 2010. Unknown manufacturer.

I have screens built with 95-258 screen corners and 91-187 latch corners. I need to build a whole frame, but cannot find the aluminum frame parts on your site.

I believe this is your product. I need a couple of these to fix my screen. Can you identify it and give me a part number?

Hello, I am looking for the above pictured corner. The other side is smooth on the corner. Then I am also looking for the same thing smooth on both sides. Thank you

Can you identify this? I need several. The square corner that the rails stop against is 1-1/8" square. The tongue that slips into the rails is 5/16" x 3/4".

what size are they mine are 9/16 w x 1/4 thick

I need a 12 screen corners measuring 1 3/16 is the bigger corner sqaure part and its 5/16 Thick 3/4 is the smaller part that goes into the channel for the screen and its 1/4 Thick

Swisco, Here is couple pictures of the side of the screen that I need the replacement part for it. Let me know if that helps and if you need more info. Thank you so much, Marcelo

I have looked everywhere for these corners. I was directed to your web site by other companies. The pictures show the measurements of the corner. Its a American Craftsman window screen, beige in color. I hope you can help me.Wayne

Hello! I am looking for a screen frame corner replacement. I believe these are American Craftsman windows. Thank you!

Have not seen these before and need 25 or so for a repair order! Hope you can help?again!! Thanks in advance!!

This pile slips into Silver Line Screen Corner Set 95-258. The pile is on a 90 degree angle from the base that slides into corner set and top frame of a American Craftsman replacement window screen. I did not see this on your website. I have included photos. Any help would be appreciated. ... (cont.)

1. First picture shows the top corners of the window screen corners. 2. Second photo shows the bottom corners of the window screen corners (it's missing the 90 degree angle piece that broke). The bottom corners have a slide bar that goes in and out. 3. Windows were purchased from Home Depot appr ... (cont.)

Cannot find these parts in the measured size. 1 1/8 x 3/8. Flange 1 1/8 x 1/4

Please help. I don't know what corner this is. Can you help me? I hope these pictures are helpful Thank you

I need 2 of the part pictured below to fix a window screen. I've looked on your website and can't seem to find the right one. Can you help me?