Viewing all customer Discussions for:

32-350 1-3/4" Drawer Slide Spacer

This plastic part broke on one of my shelves and I can't find a replacement.

600.010/08.25-meploa

the spacers/brackets for one side of sliding drawer have cracked. If you look closely at photos you can see crack in each spacer. I need to replace these but don't know size or type of spacer. Tried to order online from another retailer and was sent the wrong product. Can you help? Thank you ... (cont.)

We have a pantry with pull out trays, Ktaft Maid and the right front side bracket broke under the weight of the items in the tray.

I am looking for replacements for broken cabinet pull out hardware from 90's Woodmode frameless cabinet. The plastic strip is 22.5 "L x 3/4W x 1/4 D. The holes are 1.5 " apart. The part that supports the pull out is 2" L x 3/4 Wx 1 1/2 D (or projection). Any help would be greatly appreciated. Than ... (cont.)

Looking to replace broken plastic adapter for sliding shelf. 3 inches long; 1.25 inch between metal bracket holes; 1 6/15 inch from wall to bracket. What else do you need to know? Thank you for looking.

I am in need of 2 drawer track brackets. As you can see on attached photo I have 2 broken brackets. This is for a 2 yr old bathroom vanity.Bracket is approx 1.75in wide by 1.75in deep if that helps.Thanks,Dave

Do you have something similar to this part?

Hello, I am swapping drawers from one cabinet to another using the existing hardware including these brackets, pictured, and 21 5/8" slides. The slides are mounted to the cabinet using these two brackets on each side (one in front and one in the back). Using these brackets, the width is about a 1/4" ... (cont.)

Need a replacement for this piece, having trouble identifying it. Thanks!

Hope you can help, we need both lengths drawer glides 17-3/4 & 20-3/4. 4 sets of each. also need 8- 1" plastic spacers to hold glides at correct width

I need 1 pc of the item shown.

I am looking for drawer slide spacers that are 2 inches long. The ones I have seen advertised are only 1 3/4 long so the holes don't match up to the pilasters that are attached to the cabinet and they need to be 1 3/16 high. The ones that were originally installed are cracking and breaking. ... (cont.)

Looking for attached part

Enclosed are pictures of a good bracket which is a side mount support for a kitchen cabinet drawer. Hopefully you have it and I can purchase 3 of them for broken replacements. Bob

We'relooking for drawer slide spacers. We have 8 that have either broken or are severely cracked. These are for Brookhaven cabinets installed, we think, in 2009.

I am looking for kitchen drawer guides

Need to locate 4 drawer slide rear support and mount brackets. Willing to buy the complete drawer slide kit if necessary. These came on America Woodmark Corp. kitchen cabinets in the year 1990 purchased fro 84 Lumber in Jacksonvillle Fl. Cabinet part number is ROB30 Pull out base. Thanks for any as ... (cont.)

Hello,I have Brookhaven cabinets and as shown in the pictures above, the part that holds the sliding "rail" up, has snapped and now the drawer cannot be pulled out. The drawer otherwise is fine, but I need to replace the part that is screwed into the wall of the cabinet and holds up the sliding rail ... (cont.)