Viewing all customer Discussions for:

32-032 Rear Drawer Guide

Anything that will work. About 1.25" to fir track

1 1/8 x 5/16 space opening

32-032 is it this rear drawer guide. Thank you

Looking for this drawer Guide. No numbers on it. Gap is 1.25 inches

We are looking for replacement pieces for these plastic guides which are 1 3/4 inches for kitchen drawers. We need 5 or 6 of these.

We are renovating our rental. The kitchen cabinets and drawers are 50 years old. I am looking for this part that stops the drawer from coming completely out. Thank you !

I ordered a guide but it doesn't fit my drawer. How can I order the correct one?

I am in search of a couple of the white guides that go on the track of the picture I sent. Would you have these in stock?

They slide on a 1-1/4" metal guide bar. Have searched everywhere I can imagine for replacements (5 are broken). If I can simply find plastic guides that will fit over/on the slide bar and keep the drawers from tilting forward as they are pulled I will be happy.

I'm looking for a socket(s) for a 1-1/4 wide rail like 32-032 but heavy duty (reinforced like Kenlin 32-081). Application is for a kitchen silver drawer (there are a total of twelve drawers in the kitchen) that failed after 30 years life. I don't think the contents are overly heavy for the appli ... (cont.)

I am looking for plastic drawer guides. Thank you!

Do you happen to know if you guys carry this piece I know the photos aren't the best, but I need two of them. I cannot find them anywhere :(Outlined the only single marking on it which is a "2" let me know if you need measurements I hope this does it lolThank you!

2 1/4" wide, 1 1/8" height- not including grove. - with grove the height is 1 1/2" at it's longest part. The longest opening of the gap is 1 1/4". The smallest opening is 7/8". The thickest depth is 1/4"

Looking for dresser drawer Guides and saddle. The saddle are two small L shaped pieces of plastic. They push into a middle track with what looks like a single pin. Don't have a picture they are broken. Have added a picture of the Guides.

I am not quite certain what these are called. These are off a drawer pedestal from an old waterbed. I need to replace the rear holding bracket and the plastic clip that keeps the drawer on the steel center rail. any help would be appreciated. I could use a 6 of each item. Thank you DougI am a retail ... (cont.)

This is the one I want to get correct replacement, I have install the yellow guides from Home Depot, it fits but the drawer making noise when the drawer sliding in and out,

So I ordered part # 32-031 and it was too small. I've taken pictures. part # 32-032 seems closer but I am not sure. Can you tell me what will work? I don't mind buying a few different ones to test and see.

Wanting to replace this hardware on four cabinet drawers. Glides and sliders. Not sure which to get. Thank you for assistance

Hello, I have different types of kitchen cabinet drawers. Some have an overhead rail which the drawer is riding on. Some have an underneath rail that it's riding on. The cabinets are old and were in the home when the house was purchased. Is the hardware difficult to match for replacement and repai ... (cont.)

This guide is mounted at the top back of the drawer to keep it suspended as it slides under a captains bed. On the guide are the letters PMC 4. the entire piece measures 56mm (scant 2 1/4 inch)wide X 43mm (1 11/16)tall. The narrowest part of the opening at the top is 10mm(a scant 1/2 inch) the pla ... (cont.)