Viewing all customer Discussions for:

32-032 Rear Drawer Guide

Looking for dresser drawer Guides and saddle. The saddle are two small L shaped pieces of plastic. They push into a middle track with what looks like a single pin. Don't have a picture they are broken. Have added a picture of the Guides.

I am not quite certain what these are called. These are off a drawer pedestal from an old waterbed. I need to replace the rear holding bracket and the plastic clip that keeps the drawer on the steel center rail. any help would be appreciated. I could use a 6 of each item. Thank you DougI am a retail ... (cont.)

This is the one I want to get correct replacement, I have install the yellow guides from Home Depot, it fits but the drawer making noise when the drawer sliding in and out,

So I ordered part # 32-031 and it was too small. I've taken pictures. part # 32-032 seems closer but I am not sure. Can you tell me what will work? I don't mind buying a few different ones to test and see.

Wanting to replace this hardware on four cabinet drawers. Glides and sliders. Not sure which to get. Thank you for assistance

Hello, I have different types of kitchen cabinet drawers. Some have an overhead rail which the drawer is riding on. Some have an underneath rail that it's riding on. The cabinets are old and were in the home when the house was purchased. Is the hardware difficult to match for replacement and repai ... (cont.)

This guide is mounted at the top back of the drawer to keep it suspended as it slides under a captains bed. On the guide are the letters PMC 4. the entire piece measures 56mm (scant 2 1/4 inch)wide X 43mm (1 11/16)tall. The narrowest part of the opening at the top is 10mm(a scant 1/2 inch) the pla ... (cont.)

Would the 32-032 rear drawer guide work

I need a new plastic drawer guide. I find these really hard to figure out what size to order due to how they are measured. I measure the inside area that slides over the metal piece and I can't find one that fits. I work on furniture so this isn't my first rodeo. :) I have every size there is, exc ... (cont.)

Would like to see if you have this part in stock. We have the adjustable ones but looking for one that isn't adjustable. Thank you.

Trying to determine the right size

Hi! I think the kitchen cabinets in my home are original to the house that was built in the 1960s. I haven't been able to find replacement guides on Amazon so when I found the manufacturer label in the back of one of my kitchen drawers, I contacted them to see if they still had this part available ... (cont.)

What replacement piece will for best?

Hello I only have the one photo of a rear drawer guide that is broken and I am looking for a replacement. It is for a customer whose kids bedroom drawer. There is a number on it: H-1011. Your assistance is greatly appreciated. Regards Wayne

Hi I was hoping to find 5 of these brackets. I've found one one on your site I think matches it. The brackets are for my bathroom vanity drawers. They are installed an the back of the drawers and slide onto a rail to guide the drawers in an out. I ordered the ones I thought were correct but wante ... (cont.)

I have 4 cracked drawer slides I need to replace. I can make out the name Cluthe and the number 001362

Hi, glad I found this site! My guide is very similar to 32-031, however my opening between tabs that slides on track are larger than 3/4". It appears to be closer to 1". All the other measurements are the same.

I'm having trouble figuring out which of your drawer guides would work as a replacement. It has HDW Designer and 350 on it. I understand HDW Designer is no longer in business. Do you have anything that would work?

These are broken....needing several

see attached photo will 32-032 work in place of this? It appears only difference is the center rib on the original. The metal track is 1 1/4" wide. Also trying to identify a replacement corner guide see attached.