Viewing all customer Discussions for:

22-040 Pull Knob, 1-1/4"

The opening size is 1.2 inches wide. Total width is about 2.45wide Total height is 1.9 inches height of bottom openingis .32 inches, the square area where the wood rail is .3inches high by about 1.2 inches wide. It about .52 inches thick at thickest part

I am looking for drawer pull handle replacements for Thomasville bedroom furniture. The holes are 41/2" apart. The part that screws onto the wood is fine. It is the pull that broke off. With light use we have several that need replacing. Thank you for your assistance.

I had a pull break and looking for a replacement. markings on the back of the pull are: KBC \ ©1999 49579 Markings are included in a photo also. Thank you Hugh

4 1/2" on center of holes

Drawer hardware for AME-931-270; ANTIGUA ARMOIRE BASE Thank you

Hi! The pull is 4.375" to 4.5" center-to-center. It's probably called a 4.5". Do you have any of these pulls and knobs? If so, I'll need at least 5 pulls. If not, what do you have for a total replacement for a dresser, armoire, and two night stands? That would be 14 knobs and 10 pulls. I saw ... (cont.)

I purchased a used set of Pennsylvania house bedroom furniture from hallmark cherry collection. I am missing one knob which measures 1 1/2 inches. It is a silver color. Am also in need of 6 of 4 inch center to center bail type pulls and 6 of 3 inch. In searching the internet they seem to be from hic ... (cont.)

I am looking for replacement pulls for a pulaski wardrobe

Looking for 2 replacement knobs for the Lexington triumph buffet

This may be tricky - I am looking for replacement pull for this Bassett furniture bureau we purchased around 2000. One fell off the other day. The screw inside drawer is still there but it does not go all the way thru to the front in order to attach the pull back. I don't know if there was something ... (cont.)

Dresser knobs that have decorative washers under knobs.

I have a Lexington entertainment center for which I need replacement knobs. The key plate shown has KRC 18166 (could be 10166?) stamped on it. I see no identifying information on the other plate or the knob.